Air Compressor Cylinder Sleeve & Ring Kit For DEWALT PORTER CABLE K-0650

Description

【Universal Fitment 】This Air Compressor Cylinder Sleeve & Ring Kit fits both the single cylinder oil-free pumps and the twin cylinder oil-free pump compatible for Craftsman, Black and Decker, DeVilbiss, DeWALT, Porter Cable and others
【Function】 To rebuild a piston cylinder in the compressor. You can replace o-rings on valve plate , cylinder sleeve and piston ring in the compressor.
【Installation】It is recommended that you release air and unplug the air compressor before you install this kit. You will need a wrench set to replace this part.
【Material】The kit is constructed from high mechanical strength metal and rubber, ensure the kit no cracks and longterm service for your air compressor..
【Satisfaction Guarantee】 If you're not 100% satisfied with our product, simply return it for a full refund in 30 days. Support 12 months’ Warranty.
WHY YOU NEED THIS?
The air compressor motor drives a piston that compresses air in the pump cylinder to fill the compressor tank. Worn pump parts— such as the valve plate and seals—stop the pump from compressing the air and filling the tank. Rebuilding the air compressor pump restores the pump's ability to efficiently compress air.
If the tank won't build pressure because the pump seals or valve plate are worn, rebuild the pump using the manufacturer-approved air compressor parts. Most air compressor models use a kit for rebuilding the air compressor pump. The rebuild kit includes the cylinder sleeve,piston seal and o-rings.
Great Compatibility
This Air Compressor Cylinder Sleeve & Ring Kit fits both the single cylinder oil-free pumps and the twin cylinder oil-free pump compatible for
Craftsman, Black and Decker, DeVilbiss, DeWALT, Porter Cable and others
Function
To rebuild a piston cylinder in the compressor. You can replace o-rings on valve plate , cylinder sleeve and piston ring in the compressor.
It is recommended that you release air and unplug the air compressor before you install this kit. You will need a wrench set to replace this part.
Installtion Guide
Step 1. After disassemble the pump head, Remove the fan mounting bolt and pull the fan off
Remove the piston and old sleeve.
Step 2. Install the new compression ring
Place the new compression ring on the top of the piston. Reinstall the piston cap and Torx screw.
Step 3. Insert the piston rod (not included) into the sleeve.
Slide the piston into the new cylinder sleeve. Insert the piston and cylinder sleeve into the pump body.
Step 4. Reinstall the piston and the fan
Push the piston connecting rod onto the eccentric bearing. Align the piston connecting rod flush with the eccentric bearing.
Tighten the piston connecting rod Torx screw to 48 inch-pounds using a torque wrench
Step 5. Replace the both new valve plate seals on the valve plate assembly, then cover to the piston back.
Install the new upper valve plate seal. Install the new lower valve plate seal.
Step 6.Reinstall the pump head mounting bolts.
Position the pump head over the new valve plate with the muffler side of the pump head over the reed valves on the valve plate.