-40%

Circuitron 800-5501 BD-1 BLOCK OCCUPANCY DETECTOR Signal Drivers w/ Opto-Sensors

$ 21.09

Availability: 40 in stock
  • Model: BD-1
  • Condition: New
  • Unit Quantity: 1 Detector
  • Control System: Digital
  • Age Level: 17 Years & Up
  • Brand: CIRCUITRON
  • Scale: Multi or All Scales
  • Voltage: 10-18V
  • MPN: 5501, 800-5501, BD-1, BD1
  • Assembly Status: Ready to Go/Pre-built
  • Country/Region of Manufacture: United States
  • Type: Block Occupancy Detector
  • Gauge: Multi or ALL Scales
  • Vintage: No
  • Features: Not Painted
  • Item Weight: 0.4 lb
  • Power Type: DC

    Description

    Circuitron Electronics for Model Railroads
    BD-1 Block Occupancy Detector
    Opto-Electronic for ALL SCALES
    Bi-Directional, Signal Drivers Included for 10-18v DC
    ITEM DESCRIPTION:
    Circuitron BD-1 Block Occupancy Detector brand new in package!
    This Opto-Electronic device includes the Signal Drivers and will work with all scales. Includes Directions and everything seen in photos.
    NOTE:
    The following is a cut and paste from the Circuitron website:
    The CIRCUITRON BD-1 is an advanced, integrated circuit design Block Occupancy Detector utilizing our proven Opto-Electronic design which provides positive indication when-ever a block-section of a layout is occupied by any piece of rolling stock. Two pair of CIRCUITRON Opto-Sensors (included) are mounted between the ties at the end points of the block that is to be protected. Any piece of rolling stock entering the block shades the Opto-Sensors from ambient room light which activates the logic circuitry on the BD-1 circuit board. No modifications to rolling stock are necessary. The BD-1 is bi-directional and will give proper indications even if a train leaves a block by reversing direction and backing out. The CIRCUITRON BD-1 also contains driver circuitry sufficient to power a pair of two-color LED (including 2 lead Bi-Color LEDs) or incandescent lamp block signals at each end of the protected block (LED-type signals must be wired with a common anode [+] configuration). The outputs on the BD-1 can control a maximum of 250 ma. For 3-color signaling, additional signal drivers will be necessary (see our SD-x series of drivers later in this section). The BD-1 requires a 10-18 volt DC input for proper operation. The power supply should be filtered for proper operation. If you do not have a filtered power supply, the CIRCUITRON PS-1 filtered AC to DC Converter or PS-2 Regulated AC to DC Converter are ideal for this application. The BD-1 is constructed on a 2” x 3” printed circuit board.
    NOTE:  Photos shown are of the actual item for sale.
    SHIPPING INFO:
    We Ship Anywhere!
    This item ship in a BOX for the 8-Ounce Rate plus .50 Per Order handling.
    Combine auctions and SAVE on Shipping with ONE - .50 Handling Charge!
    US: All US Orders Shipped with FREE PACKAGE TRACKING for ease of tracking.
    Heavier items or multiple purchases may be shipped via Priority, UPS or FedEx
    for shipping cost savings.
    INTERNATIONAL: We only accept eBay for Payment. International orders shipped via eBay International Shipping OR First Class International. If you wish to have the item shipped via First Class International, PLEASE contact me prior to purchase so I can revise the listing(s) to accommodate your request.